Home > Knowledge > Content
Products Categories
Contact Us
Shandong Yongda Coating Equipment Co.,Ltd
Tel : +86-13176286262
Fax: +86-543-4586095
E-mail: eric.zhang@sdyde.com
Address: Zhongxing Road, Daixi, Zouping County, Binzhou, Shandong Province, China
Lift maintenance and application range
Dec 11, 2018

The scope of application of the lift:

1) There are special requirements for the object to be wider or longer.

2) The height of the general lift should not be higher than 25 meters.

3) For equipment that is economically considered.

4) There are restrictions on the installation location or plug-in.

5) For transporting only goods.

6) Generally applicable to mechanical equipment transportation, textile, industrial transportation.


 Maintenance

The lifts have been inspected and debugged before leaving the factory. The technical indicators meet the design requirements. When using, only the power supply is required, and the hydraulic and electrical systems basically do not need to be adjusted. Pay attention to the use of the lift, it must be placed on a solid and flat ground to prevent tipping during work. Press the "up" or "down" button to lift the table. If the workbench does not move, stop immediately for inspection. If the working pressure of the electric lift is too high or the sound is abnormal, it should be shut down immediately to avoid serious damage to the machine; check the working status of the shaft pin regularly every month. If the shaft pin and the screw are loose, be sure to lock it to prevent the pin. Falling off caused an accident. The hydraulic fluid should be kept clean and replaced every 6 months. When servicing and cleaning the lift, it is important to support the safety struts.


Related Industry Knowledge

Copyright © Shandong Yongda Coating Equipment Co.,Ltd All Rights Reserved.